• 2026考研英語全程班 6班
• 26考研全科上岸規劃營「擇校▪規劃▪備考」
• 西北工業大學2026考研專業課復習資料「真題▪筆記▪講義▪題庫」

西北工業大學力學與土木建筑學院研究生導師高行山介紹如下：

基本信息 The basic information

姓名: 高行山

學院: 力學與土木建筑學院

學歷: 博士研究生畢業

學位: 工學博士

職稱:教授

學科: 力學

工作經歷 Work Experience

2004年4月----今， 西北工業大學工程力學系教授，博士生導師

教育教學 Education And Teaching

主講《理論力學》、《機械振動》、《模態分析理論及應用》等課程，出版教材及教學參考書7部。獲陜西省教學成果獎2項，陜西省優秀教材獎1項。
 
科學研究 Scientific Research

主要從事人工結構材料特性及其應用、振動噪聲控制、工程力學等方面的教學和研究工作。主持完成兩機重大專項基礎研究項目、自然科學基金、航空科學基金等課題多項。發表論文110多篇，出版譯著1部。

研究方向：

1.計算力學

2.聲學超材料振動與聲學特性及其應用

3.振動噪聲控制

學術成果 Academic Achievements

1.Extending the global reliability sensitivity analysis to the systems under double-stochastic uncertainty, Advances in Structural Engineering,22(3,2019

2.Low Cycle Fatigue Failure Analysis of a Ni‐Based Single Crystal Superalloys at 850°C. Advanced engineering materials ,21(2),2019

3.Application of non-probabilistic sensitivity analysis in the optimization of aeronautical hydraulic pipelines. Structural and Multidisciplinary Optimization, 57(6),2018

4.Reliability analysis of motion mechanism under three types of hybrid uncertainties, Mechanism and Machine Theory, 121, 2018

5.Crystal orientation effect and multi-fidelity optimization of a solid single crystal superalloy turbine blade, Computational Materials Science,149,2018

6.Nonlinear aeroelastic characteristics analysis of composite wing with high aspect ratio based on co-rotational method, Journal of Fluids and Structures,82,2018

7.Extending first-passage method to reliability sensitivity analysis of motion mechanisms,J Risk and Reliability,231(5),2017

8.The Effect of Post-heat Treatment on the Microstructures of Single Crystal DD6 Superalloy, High Temperature Materials and Processes, 35(8),2016

9.鎳基單晶高溫合金熱機械疲勞本構模型研究，稀有金屬材料與工程，44(1),2015

10.DD6鎳基單晶合金氣膜孔薄壁平板高溫蠕變性能，航空動力學報，29(5),2014

11.Transient response analysis of multi-span pipe conveying fluid，Journal of Vibration and Control，19(14), 2013

12.Effect of Detail Design on Fatigue Performance of Aircraft Door Frame, Advances in Mechanical Engineering,5, 2013

13.基于拓撲優化的結構加強筋布局降噪方法研究, 振動與沖擊,32(13)，2013

14.On the fatigue performance of Aluminum alloy 2024 scarfed lap joints, Structural Engineering and Mechanics,44(1), 2012

15.Effect of split sleeve cold expansion on cracking behaviors of titanium alloy TC4 holes, Engineering Fracture Mechanics,88, 2012