1)Shaofeng Zhou, Qiaoxin Zhang*, Jin Huang, Effect of carbon fiber reinforcement on the mechanical and tribological properties of polyamide6/polyphenylene sulfide composites, Materials & Design, 44,493-499, 2013

2)Qiaoxin Zhang, Yuxue Chen, Zheng Guo, Honglin Liu, Dapeng Wang, Xingjiu Huang*, Bioinspired Multifunctional Hetero-Hierarchical Micro/Nanostructure Tetragonal with Self-Cleaning, Anticorrosion, and Concentrators for the SERS Detection, ASC Applied Materials & Interfaces, 5(21), 10633-10642, 2013

3)Qiaoxin Zhang, Dai Peng, Xingjiu Huang*, Effect of morphology of α-MnO2 nanocrystals on electrochemical detection of toxic metal ions, Electrochemistry Communications, 34, 270-273, 2013

4)Jingui Yu, Qiaoxin Zhang*, Zhufeng Yue. Tensile mechanical properties of Ni3Al nanowires at intermediate temperature. RSC Advances, 4(40), 20789-20796, 2014

5)Jingui Yu, Qiaoxin Zhang*. Tension-compression asymmetry in mechanical behavior and crystal defect of the thin Ni/Ni3Al (001) nanowires. Rare Metal Materials and Engineering, 43(8), 1803-1808, 2014

6)Jingui Yu, Qiaoxin Zhang*, Rong Liu, Zhufeng Yue, Mingkai Tang, Xuewu Li. Molecular dynamics simulation of crack propagation behaviors at the Ni/Ni3Al grain boundary. RSC Advances, 4(62), 32749-32754, 2014

7)Shaofeng Zhou, Qiaoxin Zhang*, Jin Huang, Dong Ding, Mechanical and tribological properties of polyamide-based composites modified by thermoplastic polyurethane, Journal of Thermoplastic Composite Materials,27, 18-34, 2014

8)Jingui Yu, Qiaoxin Zhang*, Zhufeng Yue, Rong Liu, Mingkai Tang and Xuewu Li. Molecular dynamics simulation of dislocation and phase transition for Ni-based superalloys with twist grain boundary. Journal of Computational and Theoretical Nanoscience, 12(6), 1-4, 2015

八、聯系方式

1. Tel:

2. E-mail: zhangqx@whut.edu.cn

3. 工作地址：武漢理工大學機電工程學院及中國科學院合肥智能機械研究所

1. Name

Qiaoxin Zhang

2. Brief introduction

Date of birth: Dec 20, 1961

Degree: Master

Title: Professor

Working department: School of Mechanical and Electronic Engineering

3. Education experience

Master study: Sep 1, 1985-Jun 20,1988, Huazhong University of Science & Technology

Bachelor: Sep 1, 1979-Jun 20, 1983, Nanjing University of Science & Technology

4. Working experience

September 2000-Today，Wuhan University of Technology，Professor

June 1988-June 2000，Wuhan University of Technology，associate professor

July 1983-September 1985，State-run jiangshan machinery factory

5. Research field

Nano materials & Nano sensor; Special materials & Surface engineering; Three-dimensional printing

6. Research project

1) National natural science foundation of china: Predictive service strength-life assessment model and technologies and microstructural integrity of Ni-based-single-crystal cooled blades, January 2013-December 2017, 2.8 million

2) National natural science foundation of china: Research on tribological properties of TiAl base self-lubrication composites of the wide temperature ranges, January 2013-December 2016, 0.8 million

3) Military industry cooperative project: 201304PT01, June 2012-June 2014, 1.7 million

4) Major scientific and technological innovation project in hubei province: Research on the key technology of application of heavy-duty machine shaft, July 2014-June 2017, 1.7 million

5) Enterprise authorized project: Research on metal alloy with controllable life, January 2014-June 2016

7. Representative papers

1) Shaofeng Zhou, Qiaoxin Zhang*, Jin Huang, Effect of carbon fiber reinforcement on the mechanical and tribological properties of polyamide6/polyphenylene sulfide composites, Materials & Design, 44,493-499, 2013

2) Qiaoxin Zhang, Yuxue Chen, Zheng Guo, Honglin Liu, Dapeng Wang, Xingjiu Huang*, Bioinspired Multifunctional Hetero-Hierarchical Micro/Nanostructure Tetragonal with Self-Cleaning, Anticorrosion, and Concentrators for the SERS Detection, ASC Applied Materials & Interfaces, 5(21), 10633-10642, 2013

3) Qiaoxin Zhang, Dai Peng, Xingjiu Huang*, Effect of morphology of α-MnO2 nanocrystals on electrochemical detection of toxic metal ions, Electrochemistry Communications, 34, 270-273, 2013

4) Jingui Yu, Qiaoxin Zhang*, Zhufeng Yue. Tensile mechanical properties of Ni3Al nanowires at intermediate temperature. RSC Advances, 4(40), 20789-20796, 2014

5) Jingui Yu, Qiaoxin Zhang*. Tension-compression asymmetry in mechanical behavior and crystal defect of the thin Ni/Ni3Al (001) nanowires. Rare Metal Materials and Engineering, 43(8), 1803-1808, 2014

6) Jingui Yu, Qiaoxin Zhang*, Rong Liu, Zhufeng Yue, Mingkai Tang, Xuewu Li. Molecular dynamics simulation of crack propagation behaviors at the Ni/Ni3Al grain boundary. RSC Advances, 4(62), 32749-32754, 2014

7) Shaofeng Zhou, Qiaoxin Zhang*, Jin Huang, Dong Ding, Mechanical and tribological properties of polyamide-based composites modified by thermoplastic polyurethane, Journal of Thermoplastic Composite Materials,27, 18-34, 2014

8) Jingui Yu, Qiaoxin Zhang*, Zhufeng Yue, Rong Liu, Mingkai Tang and Xuewu Li. Molecular dynamics simulation of dislocation and phase transition for Ni-based superalloys with twist grain boundary. Journal of Computational and Theoretical Nanoscience, 12(6), 1-4, 2015