• 2026考研英語全程班 6班
• 26考研全科上岸規劃營「擇校▪規劃▪備考」
• 湖南大學2026考研專業課復習資料「真題▪筆記▪講義▪題庫」

蔣福林，男，博士及博士后，助理教授、碩士生導師。團隊成員有張輝教授、滕杰教授、傅定發副教授和吳落義老師。

郵箱：jfling2820@163.com; fulin.jiang.88@hnu.edu.cn; 電話：

地址：湖南大學 材料科學與工程學院 314 房間(湖南省長沙市岳麓區麓山南路1號 郵編：410082)

熱忱歡迎具有金屬材料、材料加工/成型、材料物理及數學建模等背景的本科、碩士及博士生加入本課題組(張輝教授團隊)!

基本信息

蔣福林，男，1988年3月出生，江西吉安人，中共黨員，湖南大學和McMaster University聯合培養博士(工學)，Kyushu University博士后研究員及助理教授，現擔任湖南大學材料科學與工程學院金屬材料與控制工程系助理教授、碩士生指導教師(張輝 教授團隊)，以及Materials & Design、Journal of Alloys and Compounds、Journal of Materials Research和Transactions of Nonferrous Metals Society of China等材料領域國際知名期刊通信評審專家。目前主要研究方向包括金屬材料強韌化機理、力學與組織定量物理模型、塑性變形基礎理論、加工工藝及高性能輕量化合金設計等，正主持湖南大學科研啟動項目等，曾經主持湖南省研究生科研創新項目，作為主要參與人完成了“973”項目子課題、科技部國際合作計劃項目、國家自然科學基金和教育部博士點基金等國家級、省部級重要科研課題，同時主要負責完成了日本學術振興會(JSPS)重點基礎研究項目，取得了一系列研究成果。相關研究成果已在國際知名SCI學術期刊上發表，共30余篇，包括International Journal of Plasticity， Metallurgical and Materials Transactions A，Materials & Design，Journal of Alloys and Compounds，Materials Characterization，Materials Science and Engineering: A，ISIJ International和Journal of Materials Science等學術期刊。

教育背景

(1) 2013–2015, McMaster University(加拿大), 材料科學與工程, 博士聯合培養, 導師: G.R. Purdy和H.S. Zurob 教授

(2) 2012–2015, 湖南大學, 材料科學與工程, 博士, 導師: 張輝 教授

(3) 2010–2012, 湖南大學, 材料科學與工程, 碩士(碩博連讀)導師: 張輝 教授

(4) 2006–2010, 湖南大學, 材料成型及控制工程, 學士(推薦免試研究生)

工作履歷

(1) 2019–至今, 湖南大學, 材料科學與工程學院, 助理教授 (張輝 教授團隊)

(2) 2016–2018, Kyushu University(日本), 博士后研究員、助理教授, 合作導師: S. Takaki和T. Tsuchiyama 教授

研究領域

團隊研究方向：金屬基復合材料;合金熱力作用下的物理模擬、模型及機理;連續大塑性變形技術及相關理論;微細結構材料制備、組織與性能表征

本人主要研究方向：

[1] 輕量化金屬材料(鋁合金、高強/低密度鋼、鈦合金及鎂合金等)設計、塑性加工(實驗及有限元模擬)、顯微組織定性定量表征及強韌化機理研究;

[2] 高性能鋼鐵、鋁合金及金屬基復合材料開發、性能調控及力學行為研究;

[3] 材料力學與顯微組織定量關系的物理模型及模擬研究;

[4] 金屬材料服役性能、斷裂理論及相關應用研究。

學術成果

ORCID ID: https://orcid.org/0000-0002-2430-5867

自2019年起部分代表作(“*”：通訊作者)：

[1] Fulin Jiang *, Takuro Masumura, Kentaro Hirata, Toshihiro Tsuchiyama, Setsuo Takaki, A new diffraction line profile breadth analysis approach for evaluating plastic lattice strain anisotropy in cold-worked nickel under various strain paths, International Journal of Plasticity 112 (2019) 89-107.

[2] Kunyang Chen, Jie Tang, Fulin Jiang *, Jie Teng, Dingfa Fu, Hui Zhang *, The role of various Zr additions in static softening behavior of Al-Zn-Mg-Cu alloys during interval holding of double-stage hot deformation, Journal of Alloys and Compounds 792 (2019) 1112-1121.

[3] Fulin Jiang *, Takuro Masumura, Toshihiro Tsuchiyama, Setsuo Takaki, Effect of substitutional element addition on Hall-Petch relationship in interstitial free ferritic steels, ISIJ International (2019) In press.

[4] Huan Cai, Jiamin Hu, Fulin Jiang, Dingfa Fu, Jie Teng, Hui Zhang, A novel repetitive continuous welding extrusion for refining grain size and evading strength-ductility trade-off in AZ31 magnesium alloy, Materials Science and Engineering: A 753 (2019) 192-196.

[5] Guowei Bo, Fulin Jiang, Zhaoyu Dong, Guan Wang, and Hui Zhang, Revealing the influence of pre-precipitation microstructure on hot workability in an Al-Cu-Mg-Zr alloy, Materials Science and Engineering: A 755 (2019) 147-157.

2019年之前代表性論文(“*”：通訊作者)：

[1] Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Xiang Wang, Hui Zhang, Characterization of the isothermal precipitation kinetics of an Al-Zn-Mg-Cu alloy,Metallurgical and Materials Transactions A 49(10) (2018) 5157-5168.

[2] Fulin Jiang, Hui Zhang, Xianna Meng, Luoxing Li, Effects of Ti addition on the microstructures and mechanical properties of the Al-Mn-Mg-RE alloy, Materials & Design 55 (2014) 280-285.

[3] Fulin Jiang, Hui Zhang, Non-isothermal precipitation kinetics and its effect on hot working behaviors of an Al-Zn-Mg-Cu alloy, Journal of Materials Science 53 (4) (2018) 2830-2843.

[4] Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Hui Zhang, Static softening following multistage hot deformation of 7150 aluminum alloy: experiment and modeling, Materials Science & Engineering A 648 (2015) 164-177.

[5] Fulin Jiang, Hui Zhang, Luoxing Li, Jianghua Chen, The kinetics of dynamic and static softening during multistage hot deformation of 7150 aluminum alloy, Materials Science & Engineering A 552 (2012) 269- 275.

[6] Fulin Jiang, Hui Zhang, Xiankun Ji, Xianna Meng, Luoxing Li, Comparative hot deformation characters of Al-Mn-Mg-RE alloy and Al-Mn-Mg-RE-Ti alloy, Materials Science & Engineering A 595(10) (2014) 10-17.

[7] Fulin Jiang, Hui Zhang, Jian Su, Yishan Sun, Constitutive characteristics and microstructure evolution of 7150 aluminum alloy during isothermal and non-isothermal multistage hot compression, Materials Science & Engineering A 636 (2015) 459-469.

[8] Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Hui Zhang, Characterizing precipitate evolution of an Al-Zn-Mg-Cu-based commercial alloy during artificial aging and non-isothermal heat treatments by in situ electrical resistivity monitoring, Materials Characterization 117 (2016) 47-56.

[9] Fulin Jiang *, Kentaro Hirata, Takuro Masumura, Toshihiro Tsuchiyama, Setsuo Takaki, Effect of the surface layer strained by mechanical grinding on X-ray diffraction analysis, ISIJ International 58(2) (2018) 376-378.

[10] Fulin Jiang, Jie Tang, Dinfa Fu, Jianping Huang, Hui Zhang, A Correction to the Stress-Strain Curve During Multistage Hot Deformation of 7150 Aluminum Alloy Using Instantaneous Friction Factors, Journal of Materials Engineering and Performance 27 (2018) 3083-3090.

[11] Fulin Jiang, Hui Zhang, Shuchu Weng, Dingfa Fu, Characterization of dynamic microstructural evolution of 7150 aluminum alloy at high strain rate during hot deformation, Trans. Nonferrous Met. Soc. China 26 (1) (2016) 51-62.

[12] Setsuo Takaki, Fulin Jiang *, Takuro Masumura, Toshihiro Tsuchiyama, Correction of elastic anisotropy in Williamson-Hall plots by diffraction Young’s modulus and direct fitting method, ISIJ International 58(4) (2018) 769-775.

[13] Setsuo Takaki, Takuro Masumura, Fulin Jiang *, Toshihiro Tsuchiyama, Effect of instrumental correction on X-ray line profile analysis in cold rolled ferritic steel, ISIJ International 58(6) (2018) 1181-1183.

[14] Hui Zhang, Fulin Jiang, Xiaoyang Shang, Luoxing Li, Flow stress and microstructural evolution of the horizontal continuous casting Al-0.96Mn-0.38Si-0.18Fe alloy during hot compression, Materials Science & Engineering A 571 (2013) 25-32.

[15] Yishan Sun, Fulin Jiang, Hui Zhang, Jian Su, Wuhua Yuan, Residual stress relief in Al-Zn-Mg-Cu alloy by a new multistage interrupted artificial aging treatment, Materials & Design 92 (2016) 281-287.

[16] Setsuo Takaki, Daichi Akama, Fulin Jiang, Toshihiro Tsuchiyama, Correction of the Williamson-Hall Plots by the Diffraction Young’s Modulus, Journal of the Society of Materials Science, Japan 67 (3) (2018) 383-388.

[17] Setsuo Takaki, Takuro Masumura, Fulin Jiang, Toshihiro Tsuchiyama, Relation between elastic constants and elastic anisotropy in metals, Journal of the Society of Materials Science, Japan 67(9) (2018) 855-860.

[18] Xiankun Ji, Hui Zhang, Song Luo, Fulin Jiang, Dingfa Fu, Microstructures and properties of Al-Mg-Si alloy overhead conductor by horizontal continuous casting and continuous extrusion forming process, Materials Science & Engineering A 649 (2016) 128-134.

[19] Can Liu, Hui Zhang, Fulin Jiang, Characterization of dynamic microstructure evolution during hot deformation of the Al-4.10Cu-1.42Mg-0.57Mn-0.12Zr alloy, Trans. Nonferrous Met. Soc. China 24 (2014) 3477-3485.

[20] Jiamin Hu, Jie Teng, Xiankun Ji, Xiangxin Kong, Fulin Jiang, Hui Zhang, Microstructural Characteristic of the Al-Fe-Cu Alloy During High-Speed Repetitive Continuous Extrusion Forming, Journal of Materials Engineering and Performance 25(11) (2016) 4769-4775.

[21] Setsuo Takaki, Takuro Masumura, Fulin Jiang, Toshihiro Tsuchiyama, Evaluation of Dislocation Density in Cold Worked Low Carbon Ferritic Steel, Tetsu-to-Hagané(Journal of the Iron and Steel Institute of Japan), 104 (11), (2018) 683-688.

[22] Takuro Masumura, Setsuo Takaki, Fulin Jiang, Toshihiro Tsuchiyama, Discussion about procedure for determining parameter α in Modified Williamson-Hall method, Tetsu-to-Hagané(Journal of the Iron and Steel Institute of Japan), 104(11), (2018) 717-719.

國際會議:

[1] Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Hui Zhang, edited by: Matthias Militzer, Gianluigi Botton, Long-Qing Chen, James Howe, Chadwick Sinclair, and Hatem Zurob. In situ characterization of precipitate formation and dissolution in an Al-Zn-Mg-Cu alloy by electrical resistivity measurement, International Conference on Solid-Solid Phase Transformations in Inorganic Materials (PTM-2015), 06 (2015) 727-734. (Whistler, Canada)

[2] T. Tsuchiyama, Y. Ono, Fulin Jiang, S. Takaki, Effect of Chemical Composition on the Ductile-to-Brittle Transition on Fe-Mn-C Ternary Alloy, ICAS 2016 & HMnS (2016) 57-59. (Chengdu, China)

[3] Fulin Jiang, D. Akama, T. Tsuchiyama, S. Takaki, Role of silicon addition in grain refinement strengthening of ferritic steel, CAMP-ISIJ 30 (2017) 368. (Tokyo, Japan)

[4] Fulin Jiang, K. Hirata, T. Tsuchiyama, S. Takaki, Correlation between grain boundary segregation and Hall-Petch coefficient in Fe-Si steels, CAMP-ISIJ 30 (2017) 867. (Sapporo, Japan)

[5] K. Hirata, Fulin Jiang, T. Tsuchiyama, S. Takaki, Effect of annealing time on yield strength of Fe-3mass% Si ferritic steel, CAMP-ISIJ 30 (2017), 866. (Sapporo, Japan)

[6] Fulin Jiang, Setsuo Takaki, Daichi Akama, Toshihiro Tsuchiyama, Direct correction of the elastic anisotropy in Williamson-Hall plots for cold worked metals, EUROMAT-2017 (2017). (Thessaloniki, Greece).

[7] Setsuo Takaki, Fulin Jiang, Daichi Akama, Toshihiro Tsuchiyama, Application of direct fitting method to the modified Williamson-Hall method, EUROMAT-2017 (2017). (Thessaloniki, Greece)

[8] Takuro Masumura, Fulin Jiang, Setsuo Takaki, Daichi Akama, Toshihiro Tsuchiyama, Evaluation of dislocation density in cold worked austenitic steel SUS316L, EUROMAT-2017 (2017). (Thessaloniki, Greece).

申請專利：

[1] 張輝，孫軼山，蔣福林，袁武華. 一種保持鋁合金強度降低淬火殘余應力的時效熱處理方法. ZL 2015 1 0295203.2.

[2] 張輝，蘇劍，蔣福林，孫軼山. 一種降低Al-Mg-Si合金板材各向異性的工藝方法. ZL 2015 1 0336976.0.

獎勵與榮譽

2007年10月： 國家勵志獎學金;

2008年10月： 國家勵志獎學金，湖南大學三好學生;

2009年10月： 國家勵志獎學金;

2011年9月： 湖南大學優秀研究生干部;

2013年6月： 湖南大學博士研究生校長獎學金;

2013年10月： 湖南大學優秀研究生，湖南大學熊曉鴿獎學金;

2014年8月： 湖南大學優秀博士研究生學校獎學金;

2014年10月： 博士研究生國家獎學金;

2017年11月： 湖南大學優秀博士論文。