1. Stabilization/solidification on chromium (III) wastes by C3A and C3A hydrated matrix. Journal of Hazardous Materials(IF：3.925), 2014, 268(15):61-67

2. Utilization of oil well-derived drilling waste in shale-brick production. Environmental Engineering and Management Journal (IF=1.117), 2014, 12(11): 173-180

3. Effect of C3A content on thaumasite formation of cement-limestone powder pastes. Journal of the Chinese Ceramic Society, 2013, 41(1): 91-96

4. Cement-fly ash stabilization of cold in-place recycled (CIR) asphalt pavement mixtures for road bases or subbases. Journal of Wuhan University of Technology-Mater (IF= 0.484), 2013, 28(2): 298-302

5. Utilization of modified CFBC desulfurization ash as an admixture in blended cements: physico-mechanical and hydration characteristics. Fuel (IF=3.357), 2012, 102 (12): 674–680

6. Cementitious properties and hydration mechanism of circulating fluidized bed combustion (CFBC) desulfurization ashes. Construction and Building Materials (IF=2.293), 2012, 36 (12): 182-187

7. Utilization of municipal solid waste incineration bottom ash in blended cement. Journal of Cleaner Production (IF=3.398), 2012, 32 (9): 96-100

8. Thermogravimetric investigation on co-combustion characteristics of tobacco residue and high-ash anthracite coal. Bioresource Technology (IF=4.98), 2011, 102(20): 9783-9787

9. Influence of sintering temperature on the characteristics of shale brick containing oil well-derived drilling waste. Environmental Science and Pollution Research (IF=2.87), 2011,18(9): 1617-1622

10. Effect of MSWI Fly Ash and incineration residues on cement performances. Journal of Wuhan University of Technology-Mater (IF= 0.484), 2010, 25(2): 312-315

八、聯系方式：

1、Tel：

2、E-mail：lxggroup@163.com

3、工作地址(實驗室)：硅酸鹽建筑材料國家重點實驗室水泥混凝土大樓403

英文版簡介

1.Name: Li Xiangguo

2.Brief introduction:

1)Date of birth: 1976-11-20

2)Degree: PhD

3)Title: Professor

4)Working department: State Key Laboratory of Silicate Materials for Architectures

3.Education experience(after entering university):

1)1996-2000 Wuhan University of Hydraulic and Electric Engineering

2)2000-2003 Wuhan University

3)2003-2006 Wuhan University of Techonology(WUT)

4.Working experience:

1)2006.6-2008.10 Department of Materials Science and Engineering, WUT, Lecturer

2)2008.10-2013.10 Department of Materials Science and Engineering, WUT, associate professor

3)2008.11-2013.10 Department of Materials Science and Engineering, WUT, Associate professor，Graduate tutor

4)2013.10-2014.07 State Key Laboratory of Silicate Materials for Architecture, WUT, Professor，Supervisor

5)2014.07- State Key Laboratory of Silicate Materials for Architecture, WUT, Professor，PHD supervisor

6)2012.11-2013.11 University College London, Visiting scholar

5.Research field(no more than 3):

Advanced cement-based materials; Utilization of waste resources; Energy-saving materials

6.Research project (no more than 5):

1) National Natural Science Foundation of China: Interface characteristics and ion transport mechanism of gradient structural cementitious materials based on surface strengthening. 2014.01-2017.12. Principal investigator

2) Key Projects in the National Science & Technology Pillar Program during the Twelfth Five-year Plan Period: Research on the application technology of functional composite wall plate. 2011.1-2014.12. Participants

3) National Natural Science Foundation of China: Research on migration mechanism of heavy metals in cement clinker containing MSWI fly ash. 2011.1-2013.12. Principal investigator

4) Science and technology project of Yunnan province transportation hall:Effect evaluation and application on safety facilities of highways. 2012.9-2013.12. Principal investigator

5) Project funded by the institution：Temperature control design and service monitoring technology on gravity anchor of Pu-li bridge volume concrete.2013.02-2014.12. Principal investigator

7.Representative papers and works (no more than 10):

1) Stabilization/solidification on chromium (III) wastes by C3A and C3A hydrated matrix. Journal of Hazardous Materials(IF：3.925), 2014, 268(15):61-67

2) Utilization of oil well-derived drilling waste in shale-brick production. Environmental Engineering and Management Journal (IF=1.117), 2014, 12(11): 173-180

3) Effect of C3A content on thaumasite formation of cement-limestone powder pastes. Journal of the Chinese Ceramic Society, 2013, 41(1): 91-96

4) Cement-fly ash stabilization of cold in-place recycled (CIR) asphalt pavement mixtures for road bases or subbases. Journal of Wuhan University of Technology-Mater (IF= 0.484), 2013, 28(2): 298-302

5) Utilization of modified CFBC desulfurization ash as an admixture in blended cements: physico-mechanical and hydration characteristics. Fuel (IF=3.357), 2012, 102 (12): 674–680

6) Cementitious properties and hydration mechanism of circulating fluidized bed combustion (CFBC) desulfurization ashes. Construction and Building Materials (IF=2.293), 2012, 36 (12): 182-187

7) Utilization of municipal solid waste incineration bottom ash in blended cement. Journal of Cleaner Production (IF=3.398), 2012, 32 (9): 96-100

8) Thermogravimetric investigation on co-combustion characteristics of tobacco residue and high-ash anthracite coal. Bioresource Technology (IF=4.98), 2011, 102(20): 9783-9787

9) Influence of sintering temperature on the characteristics of shale brick containing oil well-derived drilling waste. Environmental Science and Pollution Research (IF=2.87), 2011,18(9): 1617-1622

10) Effect of MSWI Fly Ash and incineration residues on cement performances. Journal of Wuhan University of Technology-Mater (IF= 0.484), 2010, 25(2): 312-315

8.Contact information:

1) Tel:

2) E-mail: lxggroup@163.com

3) Location of lab: 403, Cement and Concrete Building, State Key Laboratory of Silicate Materials for Architectures